High Efficiency Rectifier for Caustic Soda up to DC 50kA 1000V
1. Company Simple Introduction
GERE is an international professional rectifier manufacturer with more than 20 years experience, the designed and manufactured rectifier for caustic soda having the advantages of high reliability, high efficiency, high accuacy, high stability, low ripple, intelligent digital control etc.
2. Capable Scope of Range of Rectifier for Caustic Soda
Based on customer's requirement, based on our experience, we could provide not only rectifier for caustic soda, we also supply transformers, busbars, DC isolators, switchgear, filter banks and any other electrical equipment you may require, like it is shown in below figure.
3. Application Introduction of Rectifier for Caustic Soda
The raw material of chlor-alkali electrolysis is common salt (NaCl). An electrochemical reaction according to the formula
causes Cl- ions to be oxidized to chlorine at the anode, while water is reduced to hydrogen and OH- ions at the cathode. To bring this about, specially prepared pure brine is fed into the anode compartment. A cation-selective membrane separates the cathode compartment from the anode compartment. Only hydrated sodium ions can pass through the membrane. With the aid of the electric field, chloride ions are blocked out very well. As a result, the OH- ions combine with Na+ ions in the cathode compart-ment to form pure caustic soda.
4. Main Technical Parameters of Rectifier for Caustic Soda
Input voltage | AC 3 phase kV level, 50Hz/60Hz |
Rated output DC voltage | up to DC 1000V |
Rated output DC current | up to DC 100kA |
Design Standard | IEC-60146 Semiconductors converters IEC-60076 Power transformers IEC-61378 Converters transformers |
Power factor at input @rated load | Not less than 0.9 through on load tap changer without power factor improving capacitor banks, above 0.97 after compensation |
Efficiency @ rated load | ≥98%(typically) |
Stability of output current at set point | Within ±0.5% |
Type of control | Digital control |
Ingress protection class of rectifier panel | IP54 |
Ambient temperature for design purpose | Max. 50℃ |
Rectifier pulse | Thyristor based 12 or 24 pulse |
Type and mode of control | Constant current |
Duties/overload | 150% for 1 minutes, 110% for 5 minutes, 100% long term |
Rectifier thyristor cooling | Forced water cooled(cooling water is deionized water) |
Transformer cooling method | OFWF |
Transformer installation place | Indoor or Outdoor |
HMI | Color touch panel |
Remote control interface | 4-20mA signal and dry contacts/Modbus/Profibus/ Profinet |
Thyristor N-1 redundancy | Yes |
Heat exchanger | Deionized water/raw water exchange, with redudancy |
Protections | Grounding detection and grounding fault alarm Thyristor RC snubber Fast action fuses Over heat Output over voltage Output over current Water pressure Water temperature Others required by purchaser |
5. Benefit to user of GP Rectifier for Caustic Soda
High Power Rectifiers ensure your process operating under all conditions
High performance – the base for your productivity:
− High Reliability: every measures to ensure the reliability of the system, thyristor N-1 redundancy,
heat exchagner redundancy.
− Power Saving: opmizied design, matrial, craftwork to get masimized efficiency
− High accuracy DC output current control
− Low output ripple
− High power factor
− Friendly HMI
You achieve lowest total cost:
− Maximized availability
− Maximized electrical efficiency
− Minimized maintenance
− Highest personnel safety
− Longest lifetime: properly maintained rectifier system can last more than 25 years.
− Shortest installation and commissioning
Smart digital control for immunity to interference, good automatic control system, for your easy operation and control
Life cycle service – for customer satisfaction: technical training, local service, always online
6. Company Introduction Video:
Keywords:
High Current Rectifier for Furnace Vacuum Furnace Acheson Furnace Plasma Furnace
High Frequency IGBT Plating Power Supply 1500A 2000A 15V For Plating Line