Home » New Products » High Frequency Dual Polarity Rectifier Switch Power Supply 10v 500a For Electrolysis
Product List
Rectifier
  • SCR Electrolytic Rectifier
  • SCR electrolytic rectifier adopts SCR rectification technology. As a special electrolysis rectifier, this product is mainly used in electrochemistry, including...

High Frequency Dual Polarity Rectifier Switch Power Supply 10v 500a For Electrolysis

Product Name: Polarity Reversing Igbt Rectifier Cooling: Forced Air Cooling
Polarity Reverse: Yes Reverse Way: Automatic
Reverse Time: 0~99 Hours Adjustbable Size: 710*600*450mm
Weight: 50kg Control: Remote Control With 6 Meter Control Wire

10v 500a high frequency dual polarity rectifier , switch power supply with automatic reversing

 

Application:

 

Mainly for non-ferrous metal electrolysis: aluminum, magnesium, zinc, lead, copper, manganese and manganese dioxide; gold, silver and other metal smelting; NdFeB rare earth smelting; carbide, diamond smelting; salt water, potassium electrolysis made caustic soda, potash, sodium system; fire electric heating material, as well as other types of high-power DC power supply.

AC Input voltage 380v
frequency 50/60hz
phase three  phase
output current 0~500a optional
voltage 0~10v adjustable
frequency 40khz
effiencicy ≥89%
voltage stability ≤1%
current stability ≤1%
Stabilization mode Current stabilization/Voltage stabilization (Switchable easily)
adjustment range Voltage/Current from 0-100% continuously adjustable within rated range
  reverse way automatic
  reverse time 0~99 hours adjustable
     
control part cooling system air cooling /water cooling/mixed water & air cooling
control method local panel control/remote control box/ PLC
Display contents Voltage meter/Current meter/Working/Over temp/Error, etc..
Protection method Input over voltage/Under voltage/Over current/Output short/Over heating self protection etc.
use environment Operating temperature -20-50℃
Ambient temperature 30-65℃
Ambient humidity ≤90%
Working loading Full capacity operation, more than 1,000 meters above sea level, reduced load operation

OPTIONAL FEATURE 10v 500a high frequency dual polarity rectifier , switch power supply with automatic reversing:

Reduced Ripple Ripple is the amount of AC that appears as voltage fluctuations on the DC output. Because some metal finishing applications cannot tolerate excessive ripple levels, We offers power supplies with ripple as low as 3% of the operating set point
Polarity Reversing manual reverse or automatic reverse
Digital Ampere-Hour / Minute Meter achieve the current hour,current minute control,achieve the chemical solution automatically add
Computer analog Interface 0~10v,4~20mA,0~5V interface,achieve remote control,saving the cost
PLC +HMI control RS 485,Profibus,Profinet international standard interface
multi-period Timer Timers are available to turn the rectifier off, sound an alarm, illuminate a light (or any combination) at the end of a process cycle

 

1,Placing 10v 500a high frequency dual polarity rectifier , switch power supply with automatic reversing and keep the body stability; ensure good ventilation.
2,Checking electrolysis rectifier out cover if loosing.
3,Connecting shell to ground to prevent static electricity.
4,Conecting the AC input wire
5,Connecting the DC output copper bars
6,Connecting the remote control box,if local control ,skip this step
7,Turn on air switch, then the fan starts to rotate and the power indicator light.
8,Clockwise rotation adjustment button, voltmeter degree increases, working indicate light lighting.
9,Adjust knob to maximum, then the voltmeter should indicate the rated voltage, current meter indicates the load volume accordingly.
10,Disconnect the air switch, turn off the power

 

Tag:

electrolytic rectifier,

electrolysis machine power supply

Keywords:

High Efficiency DC Gold Electroplating Power Supply Switch Mode Rectifier 8V 200A

High Frequency Electroplating Rectifier , HF Switching Power Supply 12v 100a