SCR Rectifier 38kA40V for electric arc furnace heating
1.Application
Our SCR rectifier has been widely used as a external DC power supply for industry factories in many countries and got the customer's high praise and affirmation.
2. Working principle
The power supply main circuit topology structure is 12 pulse double star rectification, convert AC 3 phase 11KV to 41V through transformer, then 0~40V DC voltage, shown as the picture above. It adopts water cooling method, has over heat, output over voltage/current, water under pressure, limit voltage/current etc. protection functions. If failure, there will be alarm. Every bridge arm is parallel connected by three thyristors (one for spare), if one thyristor is broken, the other two could still work normally.
3. SCR rectifier technical parameters
Items | Technical parameters |
AC input | 3Φ11KV(±5%),50Hz |
0-40V continuously adjustable | |
DC output current | 0-38KA continuously adjustable |
Output current stability | ≤0.5% (between 30%~100% load voltage) |
Power factor | ≥0.85 (at full load) |
Voltage reserve coefficient | ≥3 |
Current reserve coefficient | ≥2 |
Cooling method | Water cooling |
Inlet water pressure | 0.1-0.3MPa |
Inlet and outlet water pressure difference | 0.1MPa |
Water quality | deionized softened water |
Inlet water temperature | ≤40℃ |
Protection | Overheat, input over current , output over voltage/current, under water pressure and under water flow etc. |
4.SCR rectifier structure diagram
The SCR rectifier system has high voltage switch cabinet, transformer, power supply cabinet and water chiller.
Keywords:
SCR Power Supply 20kA30V For Electrolysis And Heating
SF CHINA 2018 Electroplating Rectifier Exhibition 4th-6th.Dec