Application
This is rectifier is uesd for 12V water cooled electroplating power supply 1000A 2000A 3000A.
Also suitable for electrochemistry process, such as electroplating, electrolysis, anodizing, electrowinning, electrorefining etc. to provide stable DC power supply.
Technical Specification
Data Item | Content |
Rectifier type | IGBT high frequency rectifier, modular structure, easy for maintenance |
Rated Output: DC | 1000A 2000A 3000A 12V |
Input voltage | 380V AC +-10% 3 phase 4line, 50Hz |
Mechanical type | Modular Design |
Output regulation range | 0-100% |
Control mode | Constant current/constant voltage selectable |
Cooling | Water |
Accuracy | ≤0.5% |
Working mode | 100% 24 hours continuous running |
Alarm type | Audible and visual alarm |
Corrosion coating. | For Enclosure and main circuit board components |
Power recovery | Yes.After power resuming the power supply to the rectifier, |
Power factor | ≥0.94 |
Efficiency | ≥90% |
IP degree | IP54 |
Insulation grade: B | B means allowed temperature rise than ambient temperature is 130℃) |
Remote control | RS485, Profibus, Profinet, 0-10V, 4-20mA Optional |
User Benefits
Modular design
Upgradable output current
Power saving(high efficiency≥90%)
Low ripple at all output current
Space-saving
Easy service
Reliable quality
Special treatment in corrosive factory
Digital control, software programming
High stability to load variation
Long time high control accuacy(≤0.5%)
RS485 communication included
Amperehour for dosing system control
Timer function for automatic running
Resolution 0.1A
Accurate output value setting
Process program available
Rectifier protection stop delay time setting available
Multiple remote control communication optional: Profibus, Profinet, analog signal 4-20mA,0-10V
Touch panel or digital meter, buttons control optional
Touch panel operation password protection available
Technical support and service
Spare parts available
Software upgrading
n Cooling water requirement:
Item | Value | Remarks |
Water quality | PH:6~8, resistivity ≥20KΩcm, hardness<8 dH | Water is not corrosive, dirty or contains acids. |
Inlet Water Temperature | 20-35℃ | To prevent condensation, the water must not be too cold. The ideal temperature is between ambient temperature and 35℃(not below dew point) |
Inlet Water Pressure | 0.2MPa-0.5MPa | |
Water flow | For 18 no. Of 20000A 12V rectifier>1800L/Min. (recommended) For 18 no. Of 20000A 12V rectifier>1080L/Min. (lowest)
For 1 no. Of 20000A 12V rectifier>100L/Min. (recommended) For 1 no. Of 20000A 12V rectifier>60L/Min. (lowest) |
n Whole rectifier & all the components to be properly tested & inspected, report available
n Quality management follow ISO9001:2015.
n For safety, provide below protections:
Protection type | Protection value | Rectifier action |
Over/under input voltage protection | 380V+/-10% | Alarm Rectifier stop |
Driving protection | / | Alarm, rectifier stop immediately |
Over heat protection | 65℃ | Alarm Rectifier stop |
Over current protection | Rated output current+100A | Alarm Rectifier stop |
Over voltage protection | Rated output voltage+2V | Alarm Rectifier stop |
Water pressure protection | Alarm Rectifier stop |
Touch panel main page:
Plywood packing, suitable for export and import, strong for long distance transportation.
Looking for 12v water cooled electroplating power supply 1000a 2000a 3000a? Chengdu General Rectifier Research Institute is one of the professional manufacturers and suppliers. We have been dedicated to this field for over 20 years and already exported products to India, USA, Germany, etc. Equipped with a productive factory, we warmly welcome you to buy our high quality products made in China at competitive price or try our customized service.Keywords:
Modular IGBT based 12v DC power source for plating industry
150A 24V Battery Charger Rectifier For Lithium Ion Ni Cd Battery