Home » New Products » Water Treatment Transformer Rectifier With IGBT » anodising rectifier
Product List
Rectifier
  • Pulse Electroplating Power Supply
  • This pulse power supply adopts IGBT switch rectifier, PWM chopper technology, DSP microcomputer digital control technology and touch ...
  • SCR Anodizing Power Supply
  • This SCR anodizing power supply adopts thyristor rectifier technology, PLC, DSP microcomputer digital control technology and touch...

anodising rectifier

oxidation power supply

copper plating rectifier

  • Voltage Stabilization 1.8 MVA Rectifier For Battery Energy Storage CE UL
  • Voltage Stabilization 1.8 MVA rectifier for battery energy storage Overview     The situation of the project is as follows: Capacity of the power grid: 1.8 MVA, support time: 3 seconds, power grid: 380V/50HZThe load is for motor, lighting and other food factories.This plan aims to add a 2MWh battery energy storage system to cope with the impact of the voltage drop of the grid on the load.ParametersModel No.GP-2MHWAC InputAC Access Method3P3W(no transformer)Rate Power500kWRated Max Capacity550kVARated AC Input voltage400VAC Input Voltage Range(follow   yours )400V+1
  • IGBT Controlled Oxidation Power Supply Rectifier Switch Mode 48V 300A
  • Application: Anodizing Efficiency: >85% Control Way: Remote Control Cooling Way: Air Cooling Color: Grey Or Black Type: AC To DC 48V 300A IGBT controlled switch mode anodizing power supply 48V 300A IGBT controlled switch mode anodizing power supply is used to anodizing. such as sulfuric acid, chromic acid, oxalic acid Some inner part showed followed, just diffierent color. Some pics was followed  ApplicationDifferent volt a
  • 8V 3000A remote control zinc electro plating rectifier power supply
  • Application: Electroplating Efficiency: >85% Control Way: Remote Control Cooling Way: Air Cooling Color: Grey And Black Type: AC To DC 8V 3000A remote control zinc electro plating rectifier power supply 8V 3000A remote control zinc electro plating rectifier power supply is used to electroplate. But not only for zinc electroplating, but other many applications. Such as chrome, nickel,copper and so on. The main transformer. It adopts amorphous core t
  • IGBT Rectifiers For Galvanic
  • TECHNICAL SPECIFICATIONS• Power supply: three-phase 220V/380V/440Vac +/- 10% 50/60 Hz.• Output voltage: 12V.• Output current: 2000A.• Regulation range: from 2 to 100% of output voltage or current.• Voltage ripple: less than 5% over whole regulation range.• Efficiency: ≥93% depending on load factor.• Protection: against short-circuits, phase loss, overtemperature, overvoltage.• Cooling: forced air.• Max. room temperature: 40°C.• Max. humidity: 80%.ADVANTAGES:1. Lower energy consumption.2. Greater penetration.3. IGBT module design.4. Output waveform quality remains CONSTANT even as voltage/c
  • 18V 6000A water cooling hard chrome electrolating power supply rectifier
  • Application: Electroplating Efficiency: >85% Control Way: Remote Control Cooling Way: Water Cooling Color: Grey And Black Type: AC To DC 18V 6000A water cooling hard chrome electrolating power supply rectifier 18V 6000A water cooling hard chrome electrolating power supply rectifier is used to electroplating or anodizing. 18V also can be used to electroplate hard chrome. Regarding to anodizing, this unit installed on filters, so ripple is lower than 5%.
  • Europe Quality 10000A 60V Portable Rectifier Copper Electrowinning UL CE CSA
  • Europe quality 10000A 60V  Portable Rectifier  copper  electrowinning Portable Rectifier copper  electrowinning, also called electroextraction, is the electrodeposition of metals from their ores that have been put in solution via a process commonly referred to as leaching. Electrorefining uses a similar process to remove impurities from a metal. Both processes use electroplating on a large scale and are important techniques for the economical and straightforward purification of non-ferrous metals. The resulting metals are said to be electrowon.Electrowinning Non-fe
  • Stainless Steel Igbt Electropolishing Rectifier Machine Switching Mode 1500A 15V
  • Application: Electroplating Efficiency: >85% Control Way: Remote Control Cooling Way: Air Cooling Color: Grey Or Black Type: AC To DC 1500A 15V stainless steel igbt electropolishing rectifier machine 1500A 15V stainless steel igbt electropolishing rectifier machine has two type for electropolishing stainless steel. One is unit with filter. Another one has not. The unit equipped with filter has better performance. Please choose which one u need.&nbs
  • 8V 25A DC Electroplating PCB Rectifier Power Supply Low Ripple High Frequency
  • Application: Electroplating Efficiency: >85% Control Way: Panel Control Cooling Way: Air Cooling Color: Black Type: AC To DC 8V 25A small black pure dc low ripple electroplating rectifier 8V 25A small black pure dc low ripple electroplating rectifier is used to electroplating. This rectifier adopted our newest technology. It's pure dc and will not add any extra fees from customer. Smaller and lighter.  Ampere-min meter is extra parts