IGBT power supply 5000A12V for data center
1. Application
A data center is a building used to house computer systems and associated components, such as telecommunications and storage systems. It generally includes backup components and infrastructure for power supply, data communications connections, environmental controls and various security devices. A large data center is an industrial-scale operation using as much electricity as a small town.
Power supplies are very important for a data center, they should prevent single points of failure and are often made to achieve N+1 redundancy in the systems. Static transfer switches are sometimes used to ensure instantaneous switchover from one supply to the other in the event of a power failure.
Our IGBT power supply 5000A12V has been used for data center and got the customer's high praise and affirmation. The main distinguishing features are:
l Modular design
l Programmable software control
l Provide multiple communication, suitable for automatic control system
l High efficiency, energy saving
l High power factor
l High accuracy and stability
l High intelligence
l Easy operation and maintenance
l Compact size, light weight
2. Technical data
3. Mechanical configuration
4. Protection functions
Protection type | Protection value | Rectifier action |
Driving protection | IGBT module CE voltage abnormal or IGBT damaged | Alarm, Stop |
Over heat protection | 85℃ | |
Over current protection | ||
Water under pressure | Inlet water<0.02MPa, alarm. Inlet water pressure<0.01MPa, alarm and stop running | |
Water over pressure | Inlet water pressure 0.55MPa, alarm and stop |
5. Outside layout
1 | LED display of running status |
2 | Breaker |
3 | Touch panel |
4 | 3 phase AC input(A,B,C,N) |
5 | 4-20mA analog signal interface |
6 | Output + busbar |
7 | RS485 interface |
8 | Control box interface |
9 | Water outlet |
10 | Output - bus bar |
11 | Water inlet |
6. Cooling water pipe connection
5000A/12V, G1(1 inch, 25.4 mm), male screw, equipped with valve with female screw.
7. Communication connection
(1)The rectifier is equipped with RS485 Modbus communication, with below interface, connection place please refer to the below picture.
(2)The rectifier is equipped with remote 4-20mA signal connection please refer to the below picture.
8. Touch panel functions
The HMI panel functions is powerful and can provide a variety of state to meet customer needs.
(1) Communication Status:
(2) Display output current, voltage, water pressure, amperehour counting etc.
(3) Ampere Hour reset
(4) Timer setting
(5) Output Setting
(6) Running mode display
l Control Mode: Local control (control by touch pane) or Remote control
l Output Mode: Constant Voltage or Constant Current
(7) Running status display
l Running: always red-Stopped status, green flash-running
l Alarm: gray-no protection, red flash-there is protection
(8) Waveform
(9) Daterecord
(10) alarmdescription
Keywords:
IGBT Economic Series 600A 12V Rectifier For Electroplating
IGBT Rectifier Power Supply 8000A15V For Hard Chrome Plating