Home » New Products » UL CE CSA 2000A15V Ac To Dc Power Supply For Data Center » low ripple switching power supply
Product List
Rectifier
  • Pulse Electroplating Power Supply
  • This pulse power supply adopts IGBT switch rectifier, PWM chopper technology, DSP microcomputer digital control technology and touch ...
  • SCR Anodizing Power Supply
  • This SCR anodizing power supply adopts thyristor rectifier technology, PLC, DSP microcomputer digital control technology and touch...

low ripple switching power supply

electropolishing rectifier

pcb plating rectifier

  • Sodium Hypochlorite Power Supply For Membrane Electrolysis Up To 100kA 1000V
  • ApplicationThis is high power thyristor rectifier system used for Caustic Soda Rectifier for Membrane Electrolysis Up to 100kA 1000V.Rectifier System Diagram for the Chlor-Alkali IndustryThe rectifier system is composed of input high voltage switchgear, voltage regulating transformer for on load tap changer(OLTC), rectifier transformer, rectifier, DC switch, cooling water heat exchanger, power factor & harmonic compensation facility. To get higher power factor and lower ripple, 12 pulse configuration is commonly adopted.    The system circuit diagram and system
  • High Frequency Electroplating Rectifier , HF Switching Power Supply 12v 100a
  • Input Voltage: 110v/220v Phase: Single Phase Size: 420*310*145mm Weight: 10kg Control: Local Panel Control Cooling: Forced Air Cooling Output Voltage: 0~12a Adjustable Output Current: 0~100a Adjustable High frequency switching plating rectifier, also called as HF switching power supply: Which is a new type electro plating machine plating rectifier – high frequency switching power supplies. It combines
  • High Frequency Switching Coating Power Supply
  • Our company specialized in production of high frequency switching electroplating power supplies,e-coating power supplies,electrical motor testing power supplies ,aluminum oxidizing power supplies,laboratory power supplies etc.These products are widely used in many surface treating fields like electroplating,electrolysis,aluminum oxidizing, and lots of industries in need of direct current power supply such as pharmaceuticals ,fine chemicals and DC motor testing.Among them ,the high-power high frequency switching electroplating power supply developed independently by
  • 50kVar 100kVar Module Power Factor Improvement STATCOM SVG PF Up to 1
  • 50kVar 100kVar Module Power Factor Improvement STATCOM SVG PF Up to 11. STATCOM Introduction STATCOM, also called SVG(Static Var Generator), is a power factor controller, used to improve power factor through compensating reactive power dynamically and accurately, to replace traditional capacitor bank or work together with capacitors. 2. Phenomena caused by power quality problems Power factor is too low Because the motor etc. inductive load have inductive reactive power, resulting in low power factor, may be fined by government.The neutral current is too large Due to the third harmon
  • 12v 500a three phase protable igbt electroplating power supply
  • Input Voltage: 220V/380V/415V Phase: 3 Phase Application: Electroplating Output Voltage: DC 0~12V Adjustable Output Current: DC 0~500A Adjustable Cooling: Air Cooling Control: Remote Control Accuracy: CC CV +-1% Output Frequency: 40khz Size: 605*415*240mm Weight: 35kg GENRAL SEPCIFICATION FOR 12V 500A igbt electroplating power supply AC Inp
  • 48V 100A Titanium Anodizing Power Supply Rectifier Remote Control CE Approved
  • Application: Anodizing Efficiency: >85% Control Way: Remote Control Cooling Way: Air Cooling Color: Black Or Grey Type: AC To DC 48V 100A grey titanium anodizing power supply rectifier 48V 100A grey titanium anodizing power supply rectifier is used to anodizing. Such as sulfuric acid, chromic acid, oxalic acid. It's 5th generation high frenquency switching rectifier/power suuply/ Smaller and lighter compared with 4th generation rectifier
  • DC Power Supply Power 6000A15V For Anodizing Aluminium
  • DC power supply power 6000A15V for anodizing aluminium 1. Application        Anodizing is a process for producing decorative and protective films on articles made fromalumnium and its alloys. It is essentially a process where a thick film of aluminium oxide isbuilt up on the surface of the aluminium through the use of a direct current electrical supply.In the majority of anodising plants in New Zealand it is carried out in an electrolyte bathcontaining sulphuric acid with aluminium sheet cathodes and the work to be anodisedattached to the anode.  &nb
  • 15V 1000A High Frequency Switching Power Supply For Copper Nickel Plating Equipment
  • Application: Electroplating Efficiency: >85% Control Way: Remote Control Cooling Way: Air Cooling Color: Black Type: AC To DC 15V 1000A high frequency copper nickel plating rectifier power supply 15V 1000A high frequency copper nickel plating rectifier power supply is used to electroplating. It's 5th generation high frenquency switching rectifier/power suuply/ Smaller and lighter compared with 4th generation rectifier. We have two differe